EK-Quantum Torque Micro HDC 12 - Nickel

900  (税込)
(税抜 818 )
FTG-EK639160
67 個
+

G1/4 ストレート OD12mm ハードチューブ用継手
真鍮ニッケルメッキ製
Made in Slovenia - EU!

Product EAN : 3831109837382

Details

EK-Quantum Torque Micro HDC 12 - Nickel is a premium 12mm fitting made for solid tubing, such as acrylic, PETG, and brass. A much smaller footprint will allow tube placement in places where a regular fitting would be too large or inconvenient. It was named Micro due to an installed height of only 11.5mm, which is 23% shorter than standard Torque HDC 12 fittings. The outer diameter of the fitting is also significantly smaller than its bigger brother, with only 16mm across the fitting.

EK-Quantum Torque Micro HDC 12-ニッケルは、アクリル、PETG、真ちゅうなどのソリッドチューブ用に作られたプレミアム12mmフィッティングです。 フットプリントがはるかに小さいと、通常のフィッティングが大きすぎるか不便な場所にチューブを配置できます。 取り付け高さがわずか11.5mmで、標準のTorque HDC 12フィッティングより23%短いことから、Microと名付けられました。 フィッティングの外径も兄よりも大幅に小さく、フィッティング全体でわずか16mmです。


The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro compression ring. The fitting is made of CNC-machined brass with a nickel plating.

ソリッドチューブは、TorqueMicroコンプレッションリング内の高品質EPDMラバーガスケットによってグリップされます。 継手は、ニッケルメッキを施したCNC機械加工の真ちゅう製です。

The surface of the fitting is smooth and has no adequate gripping surface, but the inside of the barb is socketed with a 9mm hex Allen key pattern. It's highly recommended to use an EK-Loop Multi Allen Key in order to prevent damage to other liquid cooling products.

フィッティングの表面は滑らかで、適切なグリップ面はありませんが、バーブの内側は9mm六角アレンキーパターンでソケットされています。 他の液体冷却製品への損傷を防ぐために、EK-Loopマルチアレンキーを使用することを強くお勧めします。


These fittings are guaranteed to be compatible with all other EK Water Blocks liquid cooling products.

これらのフィッティングは、他のすべてのEK WaterBlocks液体冷却製品との互換性が保証されています。


Technical data:
- Finish: Nickel
- Material: Brass
- Thread: G1/4" BSP; 4.5mm male thread length
- Supported tube: 12mm OD
- The outer diameter of a fitting: 16mm
- Installed height: 11.5mm
- Compatible solid tubing: Acrylic, PETG, Copper, Brass, Stainless Steel, Glass.


Made in Europe - Slovenia!


PLEASE NOTE:

  • Please wet the gasket (o-ring) using drops of water prior to installing the solid tube.
  • Do not use excessive force when inserting solid tube!
  • Do not use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent damage!
  • It is mandatory to use a chamfer tool on the edges of the freshly cut solid tube in order to prevent gasket (o-ring) damage.
  • This product should NOT be installed with any aluminum Fluid Gaming parts!
  • EK strongly recommends the use of PETG inserts with the use of PETG tubes.

Additional Info

Material / Design / Color optionNickel
ThreadsG1/4




価格は1個単位ですのでご注意下さい。

アングル角度
:
ストレート
チューブサイズ:
  • OD 12 mm
フィッティング ネジ:
  • G1/4 Male(雄ネジ)
フィッティング形状:
通常継手
メーカー:
EK Water Blocks