EK-Quantum Kinetic TBE 120 DDC PWM D-RGB - Acetal

29,842  (税込)
(税抜 27,129 )
PUM275
2 個
+

EK-Quantum Kinetic TBE 120 DDC PWM D-RGB - Acetal

Product EAN : 3831109819630


Details
EK-Quantum Kinetic TBE 120 DDC PWM D-RGB combo unit is a pump-reservoir assembly that is based upon a market-proven DDC pump that brings the ultimate power in a small form factor. The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine DDC 3.2 pump that is a favorite among the small-form-factor PC enthusiast community! The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops. The DDC motor is cooled by the integrated heatsink on the bottom.

EK-Quantum Kinetic TBE 120 DDC PWM D-RGBコンボユニットは、市場で実績のあるDDCポンプをベースにしたポンプリザーバーアセンブリで、スモールフォームファクターに究極のパワーをもたらします。 新しいキネティックコンボユニットは、EKクアンタム製品ラインの一部であり、高度なアドレス可能なD-RGB照明の実装と、小型フォームファクターPC愛好家の間で人気のある純正のDDC 3.2ポンプが付属しています。 リザーバーには合計6つのG1 / 4 "ポートが装備されているため、ユーザーは液体冷却ループに最適なセットアップを選択できます。 DDCモーターは、底部の内蔵ヒートシンクによって冷却されます。

The CNC-machined black POM acetal top features three G1/4" ports. One of the ports can be used with the included nickel-plated brass internal tube, which helps prevent the splashing of the coolant inside the reservoir if the top is to be used as an inlet. This reduces the chances of air being sucked in by the pump and foaming of the coolant as well. This tube cannot be used with anti-vortex insert due to size constraints. Any of the three top ports can also use used for filling the system or adding additional accessories (thermal probes, LEDs, etc.)

CNC加工の黒いPOMアセタールトップは、3つのG1 / 4インチポートを備えています。ポートの1つは、付属のニッケルメッキされた真ちゅう製の内部チューブで使用できます。 入口として使用されます。これにより、ポンプによって空気が吸い込まれたり、冷却剤が発泡したりする可能性が減少します。このチューブは、サイズの制約により、アンチボルテックスインサートと一緒に使用できません。3つの上部ポートのいずれも使用できます。 システムの充填または追加のアクセサリ(サーマルプローブ、LEDなど)の追加用


Another three industry-standard G1/4" ports are available in the bottom combo housing which is also made of CNC machined black POM acetal. Aside from the in and out ports, it features a side port usable as either an optional inlet or a drain port. Mounting is done through 4 pillars on the bottom of the pump-reservoir combo unit. The addressable LEDs are placed in a ring directed toward the coolant. Any unwanted hot-spots of the D-RGB LED of the combo unit is covered by a CNC machined aluminum piece.

別の3つの業界標準G1 / 4インチポートが下部のコンボハウジングで利用可能で、これもCNC機械加工された黒いPOMアセタールでできています。入出力ポートの他に、オプションの入口またはドレインとして使用可能なサイドポートを備えています ポート。取り付けは、ポンプ/リザーバーコンボユニットの下部にある4本の柱を介して行われます。アドレス指定可能なLEDは、冷却剤に向けられたリングに配置されます。コンボユニットのD-RGB LEDの不要なホットスポットは、 CNC加工されたアルミニウム片。

The 60mm diameter tube is made of high-quality cast acrylic material, while the reservoir bottom/pump top is CNC machined black POM acetal. The sealing is performed by a quality EPDM o-ring.

直径60mmのチューブは高品質のキャストアクリル素材でできており、リザーバーの底部/ポンプの上部はCNC機械加工された黒いPOMアセタールです。 シーリングは高品質のEPDM Oリングによって行われます。

The integrated addressable D-RGB is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB header.

統合されたアドレス指定可能なD-RGBは、すべての主要なマザーボードメーカーの人気のあるRGB同期テクノロジーと互換性があります。 3ピンLEDコネクタの矢印マークは、D-RGBヘッダーの+ 5Vマークに合わせます。

This reservoir can be easily upgraded with longer acrylic tubes used by EK-RES X3 series reservoirs.

このリザーバーは、EK-RES X3シリーズリザーバーで使用されているより長いアクリルチューブで簡単にアップグレードできます。

Technical specifications:
- Reservoir diameter 60mm
- Reservoir free volume: ~115mL
- Overall unit height: 120mm
- Mounting hole pattern: 50x50mm
- D-RGB connector standard 3-pin (5+, Digital, Blocked, Ground)

Pump electrical and mechanical properties:
- Dimensions (W x D x H): 90 x 62 x 38 mm
- Motor: Electronically commuted ball bearing motor
- Rated voltage: 12 V DC
- Power consumption: 18 W
- Maximum head pressure: up to 5.2m
- Maximum flow rate: up to 1000 L/h
- Maximum liquid temperature: 60 °C
- Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
- Power connector: SATA Power and 4-Pin PWM FAN connector

Enclosed:
- EK-Quantum Kinetic TBE 120 DDC PWM D-RGB
- Mounting mechanism
- Installation manual

Made in Slovenia - EU!
Pump motor made in Hungary - EU!

PLEASE NOTE:

  • The DDC pump is water lubricated, in other words, it uses a wet rotor design. Therefore, it is strongly recommended not to run the pump dry.
  • This product should NOT be installed with any aluminum Fluid Gaming parts!

Additional Info

Threads G1/4

インストレーションマニュアル (EK-IM-3831109819630.pdf, 423 Kb) [ダウンロード]

ポンプタイプ:
Laing DDCポンプ
ポンプ形状:
円筒型リザーバポンプ
メーカー:
EK Water Blocks